
Page 9 of 16
XC-40 COMPACT DMX DIMMER
Version 0.3 OWNERS MANUAL 02/21/2008
www.lightronics.com 20080221 drp
Lightronics Inc. 509 Central Drive Virginia Beach, VA 234354 757 486 3588
UNLINKING AN XC-40 FROM A CONSOLE
An unlink operation can be done either at the dimmer
or at the console. If done from the dimmer then only
that specific XC-40 will be released from the link and
it can then be linked by another compatible wireless
controller or relinked to the same one. If the unlink
operation is done at the console then ALL dimmers
linked to it and in receiving range will be released.
TO RELEASE THE LINK AT THE XC-40
The XC-40 link can be released regardless of whether
or not it is in the wireless operation mode
(Antd).
1. Hold down MENU/NEXT for about 5 seconds to
access the menus. The display will show
dSEt.
2. Push
MENU/NEXT until SYSt is displayed.
3. Push SELECT. The display will toggle between
CnFG and the currently selected control signal
source.
4. Push MENU/NEXT. The display will toggle
between
LOG - and OFF?.
5. Hold down
SELECT for about 5 seconds. The
XC-40 wireless status indicators will go OFF and
the unit will be released from the console.
TO RELEASE ALL LINKS AT THE CONSOLE
Note that releasing links at the console will
release ONLY dimmers which are linked to itself.
Hold down the wireless link button on the console for
about 3 seconds. The LED indicator will flash for
about 10 seconds then return to ON.
The XC-40 wireless indicators will go OFF.
SETTING THE XC-40 TO WIRELESS MODE
1. Hold MENU/NEXT for aprox. 5 seconds to
access the menus. The display will show
dSEt.
2. Push MENU/NEXT until
SYSt is displayed.
3. Push SELECT. The display will toggle between
CnFG and the currently selected control source.
4. Use to select
Antd.
5. Push SELECT to save the change.
Hold MENU/NEXT for aprox. 5 seconds to exit
from the menus.
CnFG Antd
Log- Off?
Comentários a estes Manuais